# 3D hardware simulation tool on you browser (with leds only for now)

**URL:** <https://community.penthertz.com/t/3d-hardware-simulation-tool-on-you-browser-with-leds-only-for-now/14>\
**Category:** Research & Techniques\
**Created:** [February 24, 2026, 2:22pm UTC](https://community.penthertz.com/t/3d-hardware-simulation-tool-on-you-browser-with-leds-only-for-now/14 "2026-02-24T14:22:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![FlUxIuS](https://community.penthertz.com/user_avatar/community.penthertz.com/fluxius/32/7_2.png) [@FlUxIuS](https://community.penthertz.com/u/FlUxIuS)\
**Post date:** [February 24, 2026, 2:22pm UTC](https://community.penthertz.com/t/3d-hardware-simulation-tool-on-you-browser-with-leds-only-for-now/14/1 "2026-02-24T14:22:33Z")

</div>

People are a little afraid Arduino would be a dead end project since it was purchased by Qualcomm it seems (your code belongs to them, no reverse engineering allowed, data collection, etc.). So basically they would probably be bitten by ESP if it is not already the case.

But if you’d like to simulate some Arduino projects, or just simple LEDs blinking before Xmass, I just discovered a new project thanks to [@nono2357 post on X](https://x.com/nono2357/status/2025954444437782593) which allows you to simulate an Arduino project without the hardware… I mean physically, here it is: [https://www.withdiode.com/](https://www.withdiode.com/)

I just played with already made projects, but seems cool, you can design everything on a protoboard like this:

 ![Screenshot from 2026-02-24 15-13-32](https://community.penthertz.com/uploads/default/original/1X/2586bb5dbbbf305226ff8c2e85293d01d44cdf40.jpeg)

Access the code editor, exactly like running the Arduino binary:

 ![Screenshot from 2026-02-24 15-20-57](https://community.penthertz.com/uploads/default/original/1X/144ec1d0bc08d076a6c4028ceb13c942d1736170.jpeg)

For the moment, the list of parts is a bit limited, but I guess that would be fulfilled in the future:

 ![Screenshot from 2026-02-24 15-21-59](https://community.penthertz.com/uploads/default/original/1X/a3a44c70b2fba9e400fd04bf3f3ae713bb643fa9.png)
